Register Log In

Bonneville America Forums Forums Technical Forums Performance Mods Big Bore with PROCOM ?

Check out the new Gallery

wicked red 1100

wicked red 1100
by mag10, August 21

Windshield I need to replace

Windshield I need to replace
by philwarner, May 10

first ride

first ride
by NemoJr, April 1

Steve McQueen inspired

Steve McQueen inspired
by Feral, November 28

GaRally22

GaRally22
by chy, September 18

Print Thread

Big Bore with PROCOM ? #401865 09/09/2010 12:04 AM
Joined: Feb 2005 Posts: 988 Butler, PA 69tri1 OP 3/4 Throttle
OP 69tri1 3/4 Throttle Joined: Feb 2005 Posts: 988 Butler, PA	Is anyone out there running the PROCOM CDI with a bike with Big Bore installed? I just purchased a new PROCOM unit and am trying to figure out which MAP I should start out with. I am running: Wiseco Big Bore Kit Ported and polished head Open Exhaust NOLOGY Coils and Wires Light Carb Springs Slides Drilled Modified Airbox with UNI and Bellmouth 45 Pilots Can't remember what I am running for mains right now Looking for any info I can get to make this addition as simple as possible. Any suggestions on which MAP I should try running? Any info would be greatly appreciated.

Re: Big Bore with PROCOM ? 69tri1 #401866 09/09/2010 12:33 PM
Joined: Sep 2005 Posts: 3,816 Poland-Gdansk!!! UK-Oadby Grzegorz Freelance Jedi Knight
Grzegorz Freelance Jedi Knight Joined: Sep 2005 Posts: 3,816 Poland-Gdansk!!! UK-Oadby	I do and have map number 9 loaded Grzegorz ......55 cubic inches http://www.flickr.com/photos/25172906@N06/ 904WisecoTPUSAcamsTTPignitorgutted Airbox"breath"airIntakeKeihinCR-ScarbsBlackEpcoExhaustS/SwheelsPortedPolishedHead

Re: Big Bore with PROCOM ? Grzegorz #401867 09/09/2010 2:35 PM
Joined: Feb 2005 Posts: 988 Butler, PA 69tri1 OP 3/4 Throttle
OP 69tri1 3/4 Throttle Joined: Feb 2005 Posts: 988 Butler, PA	Quote: I do and have map number 9 loaded Are you happy with the way it is running with that MAP? Mine should be here tomorrow or Saturday and anxious to get it installed and try it out. Thanks

Re: Big Bore with PROCOM ? 69tri1 #401868 09/17/2010 1:58 PM
Joined: Mar 2008 Posts: 149 Chalfont, PA Pete777 Adjunct
Pete777 Adjunct Joined: Mar 2008 Posts: 149 Chalfont, PA	Ron, have you installed the Procom yet? I have pretty much the exact same setup on my bike as yours. I ordered one and it should be here on Monday (9/20). I'm thinking I'll start out on map #9. Pete '05 America, 904, K&N pods, British Customs Bomber Exhaust

Re: Big Bore with PROCOM ? Pete777 #401869 09/20/2010 7:11 PM
Joined: Feb 2005 Posts: 988 Butler, PA 69tri1 OP 3/4 Throttle
OP 69tri1 3/4 Throttle Joined: Feb 2005 Posts: 988 Butler, PA	I haven't installed it just yet but I was thinking about starting out at MAP setting # 9 as well. A lot of people seemed to like the results at that setting. Keep me posted.

Re: Big Bore with PROCOM ? 69tri1 #401870 10/19/2010 2:16 PM
Joined: Jul 2007 Posts: 410 Basildon. Essex. UK TrOjAn Adjunct
TrOjAn Adjunct Joined: Jul 2007 Posts: 410 Basildon. Essex. UK	I have been running Map9 for a while now and its great.. I have in my hands a BIG BORE 904 kit and the bike is nearly stripped down so I shall be reporting back within a month.. it will take that long as Im having paintwork done, fibre glassing bits and powder coating others. Will post photos once done with my own design air filter mod.. TrOjAn

Re: Big Bore with PROCOM ? TrOjAn #401871 10/19/2010 3:30 PM
Joined: Apr 2008 Posts: 3,937 25-22-28-0*-**0 erle Loquacious
erle Loquacious Joined: Apr 2008 Posts: 3,937 25-22-28-0*-**0	Quote: I have in my hands a BIG BORE 904 kit and the bike is nearly stripped down so I shall be reporting back within a month.. it will take that long as Im having paintwork done, fibre glassing bits and powder coating others. with my own design air filter mod.. Man, you rich kids make me jealous! Can't wait to see the pic's. And you may see me tonight With an illegal smile J. Prine

Re: Big Bore with PROCOM ? erle #401872 10/20/2010 3:46 PM
Joined: Jul 2007 Posts: 410 Basildon. Essex. UK TrOjAn Adjunct
TrOjAn Adjunct Joined: Jul 2007 Posts: 410 Basildon. Essex. UK	Without hi jacking the thread I got it CHEAP :P my mate went to the states 6 weeks back to buy old Triumps and stuff, they know a US dealer there, he sold it to them and they shipped it home for me. As it stands its working out VERY reasonable... Im taking the jugs down tomorrow so they can get the sleeves put in. Engine should be back together soon after that.. need to powder coat that chrome breather tube at the front of the engine as its a bit rusty. Expecting the jugs to be pretty cheap to have sleeved as to my naked eye the sleeves are the same outer diameter, so its press out and press in NO DRILLING. TrOjAn

Re: Big Bore with PROCOM ? TrOjAn #401873 10/20/2010 4:33 PM
Joined: Sep 2007 Posts: 198 Likes: 1 Dorset, England PieMan Adjunct
PieMan Adjunct Joined: Sep 2007 Posts: 198 Likes: 1 Dorset, England	TrOjAn, OEM cylinders are alloy Nikosil coated, no sleeves. They will have to be bored out before the sleeves can be pressed in. Last edited by PieMan; 10/20/2010 4:34 PM. Mike (UK) _____________ 2008 Bonnie Black Special 2010 Speedmaster https://www.triumphtwinpower.com

Re: Big Bore with PROCOM ? PieMan #401874 10/20/2010 5:10 PM
Joined: Jul 2007 Posts: 410 Basildon. Essex. UK TrOjAn Adjunct
TrOjAn Adjunct Joined: Jul 2007 Posts: 410 Basildon. Essex. UK	OK thanks for clearing that up Pieman, actually makes me happier as I thought for one minute there I could have just bored my Triumph ones out Just to clear that up... my existing sleeves hve to be bored out completly? Wow, sounds expensive LOL TrOjAn

Moderated by chy, Dinqua, freedom

Link Copied to Clipboard

Powered by UBB.threads™ PHP Forum Software 7.7.4