|
|
 Change bolts for new shocks?
|
Joined: Jun 2005
Posts: 144
Adjunct
|
OP
Adjunct
Joined: Jun 2005
Posts: 144 |
I am about to install Progressive 440 shocks and the Triumph maintenance manual says to ALWAYS use new mounting bolts. Wonder if you have any thoughts? Only have about 5K on them and not trying to be cheap, just a matter of convenience.
|
|
|
Re: Change bolts for new shocks?
|
Joined: Jan 2005
Posts: 5,537
Check Pants
|
|
Check Pants
Joined: Jan 2005
Posts: 5,537 |
Quote:
I am about to install Progressive 440 shocks and the Triumph maintenance manual says to ALWAYS use new mounting bolts. Wonder if you have any thoughts? Only have about 5K on them and not trying to be cheap, just a matter of convenience.
I didn't but found one of each side had backed out over a usage period of 25-30k miles. I'm not sure if that is related to reusing those bolts, or to just check fasteners every once in a while. I put a little blue locktite on them after discovering the 2nd loose bolt.
Al
|
|
|
Re: Change bolts for new shocks?
|
Joined: Feb 2007
Posts: 23,219 Likes: 61
Fe Butt
|
Fe Butt
Joined: Feb 2007
Posts: 23,219 Likes: 61 |
I always reuse those and have never had an issue.
I learned all I need to know about life by killing smart people and eating their brains.
Eat right ,Exercise ,Stay fit, Die Anyway!
|
|
|
Re: Change bolts for new shocks?
|
Joined: Jun 2005
Posts: 144
Adjunct
|
|
OP
Adjunct
Joined: Jun 2005
Posts: 144 |
Thanks, I'll reuse and keep an eye on them. There is very little--like a quarter of an inch between the lower shock and my PDQ belt drive but I can not see how it can move closer no matter what. Right or wrong?
|
|
|
Re: Change bolts for new shocks?
|
Joined: Jan 2005
Posts: 12,164 Likes: 1
Should be Riding
|
|
Should be Riding
Joined: Jan 2005
Posts: 12,164 Likes: 1 |
Just check the bolts once ina while and you'll be fine. The Haynes manual says 28 Nm.
|
|
|
|
|
|
|
