|
|
 stock cam lobe dimensions
|
Joined: Jan 2008
Posts: 1,174 Likes: 15
Learned Hand
|
OP
Learned Hand
Joined: Jan 2008
Posts: 1,174 Likes: 15 |
this weekend I changed out my stock 05 s/m cams.
I was measuring up the new cams for bearing clearences and measured the lobes as well. I then compared those numbers with my old cams. Big difference, 2 mm more lift.
From every thing I have read the 05 and later 865cc 270 cams they are pretty mild. Does any one have the cam lobe dimension for the stock 790cc 270 cams? THat would be measured cross the largest part of the cam lobe. THe 865 stock cam measures 1.386 inch.
05 speedmaster - 1100cc, 11:1 racing pistons, Carillo rods, thunderbike cams, ported and polished head, 2mm over intake and exhaust valves, Barnett kevlar clutch, scepter pipes, oversize manifolds, 45mm HSR's, TTP stage 4 firestarter
|
|
|
Re: stock cam lobe dimensions
|
Joined: Mar 2007
Posts: 5,616
Check Pants
|
|
Check Pants
Joined: Mar 2007
Posts: 5,616 |
SOLD: 07 Black BA, 39mm FCRs, TPUSA stage 1 head, TPUSA 813 cams, TPUSA 10.8:1 pistons, TTP #3 igniter, Specialty Spares Long Cannons, Tsukayu Hard Bags. 82HP/55tq
NEW: 19 Goldwing Tour DCT
|
|
|
Re: stock cam lobe dimensions
|
Joined: Jan 2008
Posts: 1,174 Likes: 15
Learned Hand
|
|
OP
Learned Hand
Joined: Jan 2008
Posts: 1,174 Likes: 15 |
Quote:
What did you put in?
thunderbike 270-B's
05 speedmaster - 1100cc, 11:1 racing pistons, Carillo rods, thunderbike cams, ported and polished head, 2mm over intake and exhaust valves, Barnett kevlar clutch, scepter pipes, oversize manifolds, 45mm HSR's, TTP stage 4 firestarter
|
|
|
|
|
|
|
