Bonneville America Forums Forums Technical Forums General Tech Front running/marker lights

I want to run my front signal lights as running/marker lights too and I know it will require a dual filament bulb. I asked Electrical Connection when I ordered the Run Turn Brake Light Kit yesterday, if they made or would design a similar LED kit for the front. I was told the parts to make the brake kit are on back order and I got the brush off regarding the front light inquiry.
http://www.bonnevilleamerica.com/forums/...ge=1#Post344131

Does anyone know of a kit or has done this to their bike who could advise on this modification?

I've searched the forum but haven't found any threads on this.

Thank you in advance.

I put dual element lights on the front and rear to have running lights and turn signals
The lights I got ground thru the housings, the wires that power the "dim" element I spliced into the wire for the small/park light in headlight bucket, on rear I spliced into the tail light wire. I used the factory wires for the turn signals "bright" elements

Thanks Slojo. I haven't pulled the lenses off yet to see how the socket is mounted, but I'll check the auto parts store this weekend for dual wire sockets to use.