Bonneville America Forums Forums Technical Forums General Tech TPS

The TPS.I see on the right carb, on the outboard side, above the carb bowl, on the main body, what appears to be the TPS connector. Is that correct?The reason I ask is that I am in the process of rejetting pior to installing new exhaust.The Jenk's site says DO NOT disconnect the TPS from the carb,but to disconnect it from the wiring loom. Dinqua's site does not address the issue. Are both the wires on the bottom of each carb the heater system? Thanks everybody for your help,it is much apperciated. God I wish is post had spell check! Al

Actually the Dinqua site did address the TPS, but at the connector area between the two carbs.Once I got the carbs slid out to the side I was able to get to the connector.I still have the air injection on my bike and also my bike was purchased in the Northern Republic of Californianam, so there was a lot of extra hoses and lines to disconnect.The carb part is done,pipes will go on tomorrow.it was an adventure. Al