Bonneville America Forums Forums Technical Forums Custom Corner Need help wiring halogen kurakyn turn signals

Hi All,
I installed some small Kurakyn silver bullets on the rear and I can't figure out how to wire them. I must have hooked them up wrong because neither signal works now. I think I blew a fuse. Do I use the white wire or the back wire to hook to the silver bullet and where do I mount the extra ground wire. The silver bullets only have one wire. Sorry if this has been asked and answered but I can't find anyting in the forums.

The only lead from the Kurakyn is the hot, the body is the ground and that's meant to pick up a ground from the frame; the rear signal wiring is RH=green/blue, LH=green/red.

Thanks for the info. Do you think I blew a fuse when I mos-wired the lights or did I blow the relay. I have no turn signals now.

Blown fuse, it's there to protect the regulator, relay and battery. You probably just sent the hot direct to the frame and popped the fuse.

Thanks for your help>>>

Let us know how you got on.