Hi All, I installed some small Kurakyn silver bullets on the rear and I can't figure out how to wire them. I must have hooked them up wrong because neither signal works now. I think I blew a fuse. Do I use the white wire or the back wire to hook to the silver bullet and where do I mount the extra ground wire. The silver bullets only have one wire. Sorry if this has been asked and answered but I can't find anyting in the forums. Thanks
I put a wire end on the wire that would go over the mounting bolt for the ground. Get a Test light and check for the correct "hot" wire is the best way. Or a least the way I did it.
