 Magnetic Drain Plug Question
|
Joined: Feb 2006
Posts: 786
3/4 Throttle
|
OP
3/4 Throttle
Joined: Feb 2006
Posts: 786 |
I'm looking to buy a magnetic drain plug for my 05 TBA and need to know what size I need, Where I can buy one and are they worth using. Thanks 
05 TBA Mulberry/Silver, Thunder Bike pipes, K&N single Filter, 132 main Jet's, Snorkles Removed
|
|
|
 Re: Magnetic Drain Plug Question
|
Joined: Mar 2006
Posts: 2,527
Loquacious
|
Loquacious
Joined: Mar 2006
Posts: 2,527 |
14 MM 1.5 right from your tech vault
"Proud to be an Infidel" ... "100% pure American Jingoist"
|
|
|
 Re: Magnetic Drain Plug Question
|
Joined: Mar 2007
Posts: 152
Adjunct
|
Adjunct
Joined: Mar 2007
Posts: 152 |
Highly recommend! Put mine on last oil change, and it pulled a little bit of metal out of the oil (not in a quantity that would mean something bad was going on). Whether the filter would have grabbed it or not who knows, but I figure the more you can help out the filter the better.
|
|
|
 Re: Magnetic Drain Plug Question
|
Joined: Jan 2005
Posts: 850
3/4 Throttle
|
3/4 Throttle
Joined: Jan 2005
Posts: 850 |
got mine from cg and put it in second oil change 24,000 miles ago.
i believe in them
cat
George in Easy Rider: "Oh, oh I've got a helmet! I got a beauty!"
|
|
|
 Re: Magnetic Drain Plug Question
|
Joined: Jan 2005
Posts: 708
Adjunct
|
Adjunct
Joined: Jan 2005
Posts: 708 |
Quote:
got mine from cg
Dang shipping costs more than the part.
I'm glad I just went down to my local auto-parts store and picked one up. I've had mine in for a couple few years now.
Jim
|
|
|
 Re: Magnetic Drain Plug Question
|
Joined: Dec 2006
Posts: 2,150
Oil Expert
|
Oil Expert
Joined: Dec 2006
Posts: 2,150 |
thanks for the heads up on these plugs  . I would not have considered one otherwise so I ordered one with 7 extra crusher washers as I already have a S/S re-usable oil filter so my future oil changes are sorted. The best thing is the shipping whick is the same whether it is sent down the road or o/s 
Staintune Pipes, K&N Pods, 45 pilots, TBS needles and 145 mains.
|
|
|
 Re: Magnetic Drain Plug Question
|
Joined: Jan 2005
Posts: 2,362
Oil Expert
|
Oil Expert
Joined: Jan 2005
Posts: 2,362 |
Not a lot of point to them in these engines I reckon. The casings and pistons are all alloy so after run in the only worn parts it'll catch are bearings, gears etc - and if THEY'RE wearing you've got bigger problems than a few bits of metal floating about.  Still there's no harm in it and it's cheap enough so knock yourself out. FYI you can achieve the same result for free if you have a dead hard drive - pull it apart, get the rare earth magnets out, and stick them to the bottom of your oil filter with some decent glue.
|
|
|
 Re: Magnetic Drain Plug Question
|
Joined: Mar 2007
Posts: 152
Adjunct
|
Adjunct
Joined: Mar 2007
Posts: 152 |
The nice thing about it being a part of your oil change is that you now have a quick diagnostic tool to see if you are developing a serious problem. Who knows if there will be anything you can do about it, but it is one more method to getting a picture of what is going on inside the working parts of the engine.
|
|
|
 Re: Magnetic Drain Plug Question
|
Joined: Oct 2006
Posts: 222
Adjunct
|
Adjunct
Joined: Oct 2006
Posts: 222 |
I went to my local hardware store and got a pack of six rare earth magnets that are about 1/2 inch diameter. I put one on the bottom of my oil filter, which helps to secure my self-made oil filter protector, and I put the other 5 magnets on the sump drain plug. These magnets are cheap, and STRONG. They never budge. FYI...My oil filter protector was made from a tin of Ocean's canned salmon. The can is tapered, with the bottom being a perfect fit for the filter. Also, the can, from the bottom upwards, is one-piece...there is no seam at the bottom. Cut to fit the oil filter length (plus a bit extra for the rare earth magnet disk I use to help secure the can to the bottom of the filter), then rimmed the inside upper edge of the can with a thin layer of cork for a perfect fit. Painted the outside of the tin with black spray paint. It works like a ******, cost me $3, and I got a meal out of the salmon. I'll post some pics later.
Last edited by singring; 09/17/2007 1:14 PM.
|
|
|
 Magnetic Drain Plug Question
|
Joined: Mar 2007
Posts: 807
3/4 Throttle
|
3/4 Throttle
Joined: Mar 2007
Posts: 807 |
I've just got a big (3x2x1") magnet stuck to the side of my filter; it's nothing fancy, it's held on by it's own magneticism, I dunno if it works but it cost nothing in time or munny so... Will cut the filter open at next service to see what lurks within.
|
|
|
 Re: Magnetic Drain Plug Question
|
Joined: Sep 2007
Posts: 820
3/4 Throttle
|
3/4 Throttle
Joined: Sep 2007
Posts: 820 |
Isn't it magnetic as standard? I thought they all were :O
|
|
|
 Re: Magnetic Drain Plug Question
|
Joined: Jan 2005
Posts: 3,960
Loquacious
|
Loquacious
Joined: Jan 2005
Posts: 3,960 |
John
Like a dog on a car ride with my tongue in the wind
|
|
|
 Re: Magnetic Drain Plug Question
|
Joined: Jan 2005
Posts: 2,664
Loquacious
|
Loquacious
Joined: Jan 2005
Posts: 2,664 |
I keep a couple magnets under my bike to help trip traffic signals. One is attached to my oil drain plug, which I remove and attach at oil changes. At over 53,000 miles, I have never wiped even a spec of dust off the drain plug. The drain plug has taken on a slight magnetic charge of its own, but I put the magnet back on anyway.
Ride Safe,
Dennis
Triumph, it's how I live and what I ride.
|
|
|
 Re: Magnetic Drain Plug Question
|
Joined: Jan 2005
Posts: 12,164 Likes: 1
Should be Riding
|
Should be Riding
Joined: Jan 2005
Posts: 12,164 Likes: 1 |
Quote:
Isn't it magnetic as standard? I thought they all were :O
They should be.
Soren
|
|
|
 Re: Magnetic Drain Plug Question
|
Joined: Jan 2005
Posts: 1,847
Learned Hand
|
Learned Hand
Joined: Jan 2005
Posts: 1,847 |
Bought mine thru Amazon.com have not installed it yet.
Warren
04 Caspian Blue and Silver America
|
|
|
 Re: Magnetic Drain Plug Question
|
Joined: Oct 2007
Posts: 43
Greenhorn
|
Greenhorn
Joined: Oct 2007
Posts: 43 |
Quote:
I keep a couple magnets under my bike to help trip traffic signals.
Not to burst your bubble, but the loop sensors in the road don't detect magnetic fields. They detect any suitably large chunk of magnetoresponsive material, such as a car's engine, frame, body, etc...
This changes the inductive resistance of the circuit made by the wire buried under the road's surface, which tells the traffic light that a car is present above the wire loop. A magnetic field (especially from a tiny magnet under your bike) will not have any effect on it; but not to worry, as your motorcycle's frame will be plenty to trip the circuit. Even steel-alloy framed bicycles will trip a properly calibrated circuit. However, the newfangled aluminum alloy bikes with carbon-fiber wheels won't.
Additionally, those wire-loop sensors are falling out of favor. Most new traffic lights use cameras mounted on the overhead section of the gantry. These cameras are arranged such that they have a good view of the lanes. A computer monitors the images and can tell when a vehicle rolls into the lane, even a small vehicle like an aluminum-framed bicycle.
The cameras have the added feature of being able to record activity at the intersection and thereby provide photo-evidence in the event of an accident at the intersection. But their main purpose is to detect traffic waiting at the light; and certainly you won't be able to trip the camera-based lane sensors with magnets.
Now, if you really want to be able to trip traffic lights in your favor, you can purchase a MIRT device online for about $400.
http://www.themirt.com/order_now.html
Here is an article though that explains why that may be a waste of money...
http://www.drivers.com/article/651/
Certainly it is poor judgement. While I'd like to have one, I wouldn't want you, or anybody else to have one or it'd completely defeat the purpose.
He came up and asked, "What are you riding?" I looked at him and said, "Triumph Bonneville America" and he got that 'hellz yeah' look in his eye.
|
|
|
 Re: Magnetic Drain Plug Question
|
Joined: Jan 2005
Posts: 2,664
Loquacious
|
Loquacious
Joined: Jan 2005
Posts: 2,664 |
Well, I used to unable to trip the traffic lights. Now I can. It's like the blind man, "i was blind, but now i see".
There are still about 4 signals around town that will not trip for me. Before the magnets (i got out them of a magdrive pump), I couldn't trip half of them. This is an area of 150,000 people, so there are plenty of traffic lights.
Ride Safe,
Dennis
Triumph, it's how I live and what I ride.
|
|
|
|
|