Bonneville America Forums Forums Technical Forums Accessories Wanted - Front Turn Signal Relocation Clamps

I would like some relocation clamps too to go on the forks after the shrouds have been taken off. (41mm I think). Anyone have a suggestion for what to use. I have Vizor lights to put on.

You need the 41mm clamp
http://weekendconcepts.com/mounts.html
I am going to cut the mount nut off so that I have a stud. That will be threaded into the Vizor light and clamp. The trick will be to keep threading/unthreading until the light is at sitting level on the bike.

Started working on mine and you have to get the clamp with the same hole/thread as you turn signal. There are two 41 mm clamps and turns out I have the wrong one...it has a 3/8-24 threaded hole and the turn signal is a 5/16-24 thread....Check your mounting stud and order the correct one....