Bonneville America Forums Forums Technical Forums Exhaust Should I keep Mesh or Not

hey guys I just drilled last buffer (or first one if you look from rear end) and unfortunatly I just cought little bit of mesh, what is the best way to put it back, it is not smashed just lifted up from side approx. 3 mm but it bothers me, anyway is it better to keep it or to remove it
thanks

If you don't it'll blow out anyway...

That mesh goes all the way to the front baffle. Bend it back as best you can, spray some Hi-heat flat black up the pipe, and don't look in there anymore.

thanks, that will give me some peace....

I left the little piece I caught on my first set and it's still fine. Sounds like you caught about what I did so just leave it and you will never know it.