Bonneville America Forums Forums Technical Forums General Tech Help needed with wire loom blanks (3)

Hi all
I have just had the bike seat and tank off to check out the inner workings in prep for some up coming mods and I came across three blanked off connectors on the wireing loom. If someone can tell me what they are I may be able to use them in future. Yes I have wire diagram but hmmm not so good at reading it.
They are

1. Under tacho console there is a two wire connector with nothing on it. Colours are grey and orange.

2. Near carby there is a two wire connector with nothing connected and the colours are purple and black.

3. Under tank there is a 4, 5 or 6 wire blank with nothing connected. Mostly purples, blues and blacks.

Bike is all ok so I dont think they came off of something.
I took pics of all this but have not uploaded them yet.

Regards
Derek

1: Should be for the LED that goes with the optional alarm

2: I believe that is for the alarm itself

3: Looks like the Accessory Light Connector (lightbar)

I think #2 Is for the 12volt accessory outlet (Power Socket)

I will post pics of them soon, a picture is a thousand words.

Derek